| Input | Operating Voltage | 198-264V AC 50HZ/60 HZ |
| Input Voltage | 220-240V AC 50Hz/60 HZ |
| Input Current | 255mA Max. |
| Power Factor | ≥0.9 |
| Efficiency | 88% Max. (over load@230VAC) |
| Stand-by Power | ≤1.0W |
| Wiring Method | Shrapnel press terminal(L,L,N,N),
wire cross section:0.75-1.5mm2 |
| Output | Operating type | Constant Current Mode |
| Load type | LED |
| Load power | 44W Max. |
Ripple requirement
(Flickering or Flickering Free) | Flicker-free |
| No-load output voltage | <55VDC |
| Load output voltage | 30-42VDC |
| Load output current | 700/750/800/850/900/950/1000/1050mA |
| Constant current/voltage Precision | Constant Current Precision ±5% |
| Wiring Method | Shrapnel press terminal(LED+,LED-,SYNC+,SYNC+,SYNC-,SYNC-), wire cross section:0.75-1.5mm2 |
| Interface Parameter | Minor motion trigger
synchronous control interface | SYNC+,SYNC+,SYNC-,SYNC- |
| Daylight Harvesting | Daylight Harvesting Function | DH+,DH-
(co-operate with MS07 can achieve Daylight harvesting) |
| Daylight Harvesting | 250Lux/350Lux/450Lux/550Lux |
| Sensor Parameter | Detection Area | 100% / 50% |
| Hold Time | 5S/5min/15min/+∞ |
| Daylight Sensor | 50Lux/150Lux /300Lux /Disable |
| Stand-by Period | 0S/10min/30min/+∞ |
| Stand-by Dim Level | 10%/25% |
| Detection Distance | When the brightness is 100%, the minor motion detection radius is 0.5-2m,after the light is off, the normal motion detection radius is 0.5-3m. |
| Microwave Module Parameter | HF Operating Frequency | 5.8 GHz ±75 MHz,ISM Wave Band |
| Transmitting power | 0.5mW Max. |
| Operating Environment | Operating temperature | -25℃~+45℃ |
| Storage humidity | 20-90%RH |
| Storage temperature | -40℃~+80℃ |
| Outer case max. temp(Tc) | 85℃ |
| Safety & EMC | Isolation pressurization | Input(L,L,N, N)-Output (SEC+ SEC-) 3000V AC 5mA 60S |
| Safety requirement | EN61347-1, EN61347-2-13 |
| EMC | EN55015,EN61000-3-2,EN61000-3-3,EN61547, EN61000-4-2,3,4,5,6, |
| Certification | CE , RoHS |
| Others | IP rating | IP20 |
| Protection | Open circuit/short circuit/over load protection |
| Packaging requirement | Indepent installation |
| Case dimension | 110*92*40.5mm |
| Life | 50000h |
